Projects

This is a floor to floor stair that consisted of two flights. This was located in a newly constructed warehouse/wood working facility. This project included two stairwells in the building. The architect involved for the stair design was Lockwood Architects.
Click to see some more pictures.
 

This is a table base that will support a 5 foot diameter glass top for a seating up to 8 people. This table was placed inside a newly constructed four season addition off the main house, and was designed to resemble current pieces of furniture in the house. This design had gone through several stages prior to this final style. The designer for this custom fabricated table was Dietz and Associates
Click to see some more pictures.

This is a frame that will have a frosted glass panel mounted to the inner bars. This frame was placed indoors at an office located in an art gallery. The frame with glass is utilized as a privacy partition. This design had to be "opposite hand" of an existing partition just adjacent to it. The designer/coordinator of this project was www.lwrightdesign.com
Click to see some more pictures.

This is a floor supporting beam that spans 20 feet across from wall to wall and sits on a post at either end in this room that measures 20 ft x 30 ft. Prior to this support, there was a brick chimney that was located at the center of this room and continued to the second floor. The pipes attached to the bottom were used for storage and also helped for installation. The designer/coordinator of this project was CanDo CAD & Design.
Click for before and after pictures.

This is a popular restaurant whose clients wanted a place to rest their feet when pulling a chair up to the lounges bar area. To answer their request the owner had us put in a foot rail and a waitress station. The material used was stainless steel with a brushed finish to match other items in the lounge. The owner was involved with the design.
Click to see some more pictures.

This is a front porch railing built for an over 55 community with 32 homes. This style was selected to be installed at four locations within the complex. This design includes three posts drilled and set into the concrete, a molded top rail with a rolled volute, alternating vertical straight & twisted square bar picket infill. The finish is a high gloss white powder coat. The developer was involved with the design.
Click to see some more pictures.

This is also a front porch railing built for a residential home. The style was selected to blend in with the many designs found throughout the neighborhood. This design includes three posts drilled and set into the brick, a molded top rail with a bent volute, vertical straight square bar picket infill. The finish is semi gloss black paint. The homeowner was involved with the design.
Click to see some more pictures.

This client required our drafting services on designing a layout for his new garage. This garage was to be an extension off the existing building on the property. The new garage later incorporated a mezzanine and a new access doorway from inside to the existing building.
Click to see some more pictures.

This is a custom made roof rack for a Hyundai Santa Fe. My family took interest in camping a few years back and each year we accumulated a lot of items needed to take with us. This rack is like a big basket, its main purpose was to allow those big tote bins to fit snuggly around the perimeter and loose items like the tent and chairs to fit in the middle. It was a little prehistoric but came in handy.
Click to see some more pictures.